Burnt-on grease on the stove that hasn't come off for weeks – and every scrub only makes it worse.
Reaching for the next grease remover usually ends with chemical fumes, irritated hands, and a kitchen that still isn't clean. The VaporaClean™ steam cleaner heats water to 105 degrees Celsius in 15 seconds and blasts a powerful steam jet onto grease, mold, and dirt – without chemicals, without warm-up times, without residues on the work surface. Kitchen, bathroom, upholstery, or grout: A single water tank is enough for an entire room.
Benefits
- No more scrubbing: The 105-degree steam penetrates between dirt and surface and dissolves burnt-on grease and limescale deposits before you even touch the sponge – hours of rubbing are a thing of the past.
- No switching between cleaning agents: Six adjustable steam levels on the LCD display allow you to work on upholstery just as well as on exhaust hoods – a single device replaces the entire cabinet full of spray bottles.
- No worries about residues on food contact surfaces: Only distilled water goes into the tank, pure steam hits the surface – no chemicals that need to be wiped off afterward, not on work surfaces, children's toys, or pet beds.
Specifications
- Steam temperature: 221 °F / approx. 105 °C
- Heating time: 15 seconds
Water tank capacity:
- 37.2 fl oz / approx. 1.1 liters
- Power: 1,500 W
- Steam levels: 6 adjustable levels with LCD display
- Dimensions: approx. 20 x 14.5 x 13 cm
- Housing material: ABS plastic
- Color: White
- Plug: EU plug
Usage
- Fill: Fill the water tank with distilled or demineralized water – tap water leaves limescale deposits in the boiler and reduces steam performance over time.
- Set: Turn on the device, select the desired steam level on the LCD display, and attach the appropriate accessory – low level for upholstery, high level for grout and grease deposits.
- Clean: Aim the nozzle at the dirty surface, press the trigger, and let the steam do its work – then wipe off with a microfiber cloth.
Pro tip: For stubborn grout, place the steam nozzle directly on it and let the jet work for 3–5 seconds before using the grout brush – the dirt loosens without pressure.
